VIPAN
Description:
Multi-layer coextruded films, produced from different polymers (PP, PE, PA and others).
Some of the main grades of VIPAN films:
DW 330 - PE based three-layer coextruded white film for dairy products packaging
DC 330 - PE based three-layer coextruded white film with barrier black layer for dairy products packaging
BT 510 - PA based five-layer coextruded transparent film with barrier layer for vacuum and thermoformed packaging
WT 530 - PE based five-layer coextruded transparent film for lamination
Characteristics:
Reel width - from 100 to 1200 mm
Standard sizes of preformed material - 100, 200, 300, 400, 600, 1200 mm
Maximum outer diameter of a reel - 800 mm
Perfect physico-mechanical characteristics
Presentable appearance
Perfect barrier properties
Extended heat sealing range - from 115°C to 140°C
Perfect technological effectiveness
Physiological neutrality
 

Parameters

VIPAN Unit
Grade DW 330 DC 330 BT 510 WT 530  
Thickness 70-120 70-120 40-150 30-150 Mcm
Mass 1 m2 64-110 64-110 43-142 27,3-138 g
Yield 15,6-9,1 15,6-9,1 25-7,04 36,6-7,25 m2/kg
Tensile strength, not less 13,7 13,7 15 13 MPa
Elongation at break, not less
400 400 300 400 %
Resistance to puncture, not less - - 3,0 2,8 MPa
Sealing temperature 120-135 120-135 115-140 115-140 °C
Penetration, not less
For O2
-
-
30-150
- cm3/m2 24h atm
g/m2 24 h.
For H2O
3-5 3-5 3-8 3-5
 
Application
Products Packaging VIPAN
Milk, dairy products Bags DW 330, DC 330
Meat in cuts Bags DW 330, DC 330
Meat, fish and fat-containing products, sausage, ham, cheese Vacuum and thermoformed pouches BT 510
Confectionery and food concentrates Packages, flow-pack BT 510
Manufactured products, protected from moisture and oxygen Bags BT 510
Base for laminates Packages, bags, pouches WT 530, WC 530
Deep frozen foods Bags, pouches WT 530
Secondary package for physiological solution Bags BT 510
Medical tools, medications Packages BT 510
 
ATTENTION! Information presented should be considered as reference and could not be used as commercial. In any case, before making a decision about commercial deliveries, it is recommended to conduct tests intended to confirm compliance of our products to the actual conditions of application.
up

Copyright 2001 by UKRPLASTIC
All rights reserved